To switch on ( or off the eClip ) press and hold down the round on/off button for 3 seconds until the red LED light flashes quickly 3 times.
No; you must turn on the eClip app via your Smartphone in the same way as any other app by pressing the eClip icon app on your screen.
It is recommended to have the app running before you pair with the eClip device.
You can download the eClip app from the Apple or Android Play stores.
No, the eClip will automatically turn-off approx 3 minutes after no communication is detected with the app. e.g. when the app has been turned off.
Yes you can but depending on the weather and outside temperature the eClip may get hot and take a few minutes to cool down after you start your journey – this will not affect the alert to remind you to remove the baby from the car after your journey.
Use a standard ‘2032’ quality button battery (Panasonic or equivalent). eClip battery should be able to operate for about 500 hours of use; suggested time between each change is 6-months.
Shake product several times. The product turns on automatically when movement is sensed. Measurement mode is displayed on the LCD screen after 1 second.
In measurement mode, the temperature is measured once every five seconds and is displayed on the screen.
If the power doesn’t turn on the battery may be low. Simply replace the battery
The eFloat automatically switches to power-saving mode and the LCD display is blank if no movement is sensed after 30 minutes (auto-off function).
The battery cover is located at the bottom of central unit. Use a coin to twist off the cover in the direction indicated by the unlock icon. Remove the old battery and insert a new one ensuring correct polarity (+/-).
Battery is standard button type CR2032 which are available at any electronic or convenience store or you may purchase directly on our website here.
Position the thermometer probe at the center of the forehead with light skin contact. To take a temperature measurement lightly press AND THEN RELEASE the Measure Button. The eTherm beeps when the measurement is completed.
Remove the thermometer cap and place the thermometer probe gently into the ear canal with minimum pressure to ensure that it sits firmly and feels comfortable. To take a temperature measurement lightly press the Measure Button. The eTherm beeps when the measurement is completed.
When the device is TURNED OFF, hold the measurement button for 10 seconds until the F sign appears – press the button again for 10 seconds and it will change back to measuring units to C.
Wipe the surface of the thermometer probe gently with 75% isopropyl alcohol using cotton bud or an equivalent soft cloth.
Use a dry soft cloth to clean the screen (display) and thermometer casing – the device is NOT waterproof. DO NOT immerse it in water or use detergents or cleansing liquids. Any water damage will void the product warranty.
There is no need to manually turn the device off – the automatic power-off feature will turn-off your eFloat if the device has not been in use for 8 seconds.
Use any finger that easily fits into the thimble but do not force the finger into the thimble. Finger should be dry at time of placement in soft thimble and reading measurements. Please click here for our full instruction guide.
This is normal while the unit is calculating the measurements. This can take up to 10 seconds if the hands are cold or poor circulation at finger ends. If persists try another finger.
If the user has very small fingers (e.g. children), try using the thumb.
inger nail direction needs to match symbol on soft silicon finger boot; the display should be facing you so it’s easy to read. By pushing the front button for 2 seconds the display is reversed.
Battery is standard 3.6V ½ AA size batteries which are available in many electronics stores or on-line or via our website here.